| Thickness (mm) | 1.0 mm | 1.5 mm | 2.0 mm | 2.5 mm | 3.0 mm |
|---|---|---|---|---|---|
| Coverage (Sq. ft.) | 600 | 500 | 375 | 300 | 210 |
This is default category for all the durabull products.
-
Ready to use Wall-putty for indoor and outdoor application Ready to use white cement based putty for indoor and outdoor surface, mortar walls, concrete mortar walls and ceilings. It renders smooth and double surface for all kind of decorative paints. Coverage :
Packaging : 40 kg/bags -
Ready to use grey cement based tile adhesive for floor tile Ready to use grey cement based non-shrink, self-curing, waterproof, tile adhesive for floor tile fixing on horizontal surface. Uses : Use for fixing ceramic and mosaic tiles on floor surface in domestic/commercial buildings. Coverage : 3-3.5 Kg powder required/sqm for 5mm average thickness. Approx. 50-60 sq ft is covered by a bag of 20 kg depending on the substrate level. Approx. 85-100 sq ft is covered by a bag of 30 Kg depending on the substrate level. Packaging : 20 Kg, 25 Kg, 30 Kg bags -
Ready to use heavy duty tile adhesive for vitrified and mosaic tiles DURABULL NSA GOLD is grey cement based ready to use, non-shrink, self-curing cementitious adhesive for bonding ceramic, vitrified, mosaic tiles, stone, and marble, etc. on vertical and horizontal surfaces. Coverage : 4-5 Kg powder required/sqm for 5 mm average thickness. Approx 40-50 sq ft is covered by a bag of 20 kg for 5 mm thickness depending upon the substrate level. Approx. 60-75 sq ft is covered by a bag of 30 kg for 5mm thickness depending upon the substrate level Packaging : 30 Kg bags -
Ready Dry-mix block joint mortar DURABULL FIXO BLOCK is a thin layer jointing mortar which perfectly binds AAC blocks with a thin layer of 3-5 mm as against 12-14 mm (approx.) of conventional mortar. The product is specially designed to provide higher bonding as a result of higher tensile adhesion strength. It is pre-mixed, easy to apply, high quality mortar comprising of cement, graded sand and admixtures. Pre-wetting of the substrate is essential for better coverage. Coverage : Under normal circumstances the coverage is approximately 11.15 square meters with an average thickness of 3 mm for a bag of 40 kg for block size 600 x 200 x 150 mm Packaging : Available in 40 kg PP laminated bags. -
Ready Dry-mix mortar Durabull Ready Mix Plaster is a premixed mortar with high quality polymer adhesives that makes application simple and convenient. It can be used on inner and outer walls made of brick, block, stone as well as concrete. It provides an even surface on which tilling can be done faster and efficiently. Pre-wetting of the substrate is essential.Packaging : Available in 40 kg PP laminated bagsSr. No Properties Values 1 Bulk Density 1.2-1.6 kg/litre unit 2 Compresive strength (MPa) More than 4 in 28 days 3 Coverage 1.7 - 2.4 kg/sq m/mm 4 Pot life water requirement 2 hours 17% to 19% by weight -
High precision, non-shrink, expanding pouring grout Cement based flowable, two stage expanding grout with selected aggregate for grouting bearings, machine foundations, column joints in precast constructions, etc. Dosage: For Flowable : Water : Powder = 0.14 to 0. 16 by weight (4.2 to 4.8 l water per bag) For Pourable : Water : Powder = 0.12 to 0. 14 by weight (4.2 to 4.8 l water per bag) Packaging : 30 Kg bags -
Non-metallic mineratery shake floor hardener DURABULL FLOOR HARDNER is a one part, pre-blended, coloured mineral dry shake hardener for concrete comprising of cement, specially selected natural mineral aggregates, admixtures and pigments. Uses: DURABULL ROCK TOP provides a hard wearing, mineral dry shake topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a colored, wear resistant smooth surface. Typical uses are in ware houses, factories, shopping malls, public areas, restaurants and museums. Layer Thickness: ~2.5 to 3.0 mm at dosage of ~5.0 kg/m2 Consumption: For light duty 3.5 to 4.0 kg/m2, For medium duty 4.5 to 5.0 Kg/m2, For heavy duty 5.5 to 6.0 Kg/m2 Packaging : 30 kg bags -
Ready to use non-shrink, cementitious micro concrete DURABULL MICRO CONCRETE is factory designed pourable, non-shrink, repair concrete with selected cement, aggregate and other chemicals. Recommended water and coarse aggregate to be added at site as per requirement. Uses: DURABULL MICRO CONCRETE is mainly recommended for the repair of damaged concrete structures e.g Columns, Beams, Slabs, etc. It is also recommended for grouting of large gaps. Packaging : 30 kg bags -
Liquid waterproofing compound for concrete and plaster Internal liquid used for waterproofing of concrete & sand cement mortar. It makes the concrete / mortar more cohesive & increases derability, used in basements, roof slab, water retaining structures, external plastering etc. Reduces shrinkage cracks. Coverage: 200ml per 50 kg bag of cement, just add to gauging water that is to be mixed with mortar / concrete. Packing: 1Ltr,. 5Ltr., 20 Ltr. & 210 Ltr. -
SBR for waterproofing & repairs Total Solid Content 40% + 2% Styrene Butadience Rubber based milky white polymer used in cement plaster, concrete, bonding and waterproofing properties / coating / repairs as an in plasters. Coverage: 20-22 sq.Ft / Kg for two coats (SBR + cement in the proportions ratio 1:3) Packing: 1Ltr,. 5Ltr., 20 Ltr. & 210 Ltr.
-
Our durabull Products are multi functional, Acrylic polymer based water proofing liquid and bonding agent for old and new cementitious substrates. Features & Benefits: Excellent adhesion to cementitious substrates. Works as an effective bonding agent by acilitating more open time. Can modify mortar / concrete for specific requirement in repair. Reduces cracking n mortar and screeds. Suitable for internal and external applications. Packing: 1Ltr,. 5Ltr., 20 Ltr. & 210 Ltr.